Structural Design Tips for Minimizing Earthquake Damage – However, buildings with weak structures suffered significant damage, with very low magnitudes. This should not happen – especially because when the building is wobbly, human life is in danger.
Tips for Minimizing Earthquake Damage We compiled a list of structural design tips that you should consider when building homes in areas impacted by seismic action. First, you should know that there is no complete architectural plan. Still, when it usually comes to create a house inside the quake area, its shape should be the same aerodynamic. The foundation of the house should be placed on a leveled ground. Keep in mind that the usual form is much more stable than the unusual. Cantilevers should not have a length of more than 3-4 feet or should be avoided altogether. Columns are very dangerous and can easily collapse causing many hazards, therefore the distance between them should be as small as possible. Avoid fires and accidents caused by poor electrification plans by installing the main switch and the circuit breaker. Calm down with a water tank on the cutting edge – because it affects the stability of the building. We recommend that you use more than one tank and place them in different locations so as not to affect the center of gravity. The materials used must be concrete and glass fiber and as this is the best and most resistant material in the construction field. The entire building project should be very stable – this means that its center of gravity should always be at the exact pin point location. You can achieve it in consultation with professional architects in this regard. Structural Design Tips for Minimizing Earthquake Damage