Simple 3 Bedroom Bungalow House Design – The Reuben model is a simple 3 bedroom bungalow house design with floor area of 82.0 square meters. This concept can be built in many with minimal minimal frontage with 10 meters keeping a 1.5 meter setback on both sides. With the current layout, the backslide is 2 meters and the front at 3 meters, requiring an area of at least 167 square meters. Simple hip roof, gray walls and a combination of brick and white walls on the left side, aluminum window frames and a long pre-painted roof are exterior features of the design of this 3-bedroom bungalow house. Here are 4 home elevations detailing the minute features of the house.
Simple 3 Bedroom Bungalow House. The front view shows the entrance of a wood panel, aluminum window frames, brick wall accents and a crop box on the front. Go to the details with the floor plan below. A small foyer on the front will greet you, with a small box of plants and covered by concrete roof plates. Opening the main entrance will take you to the open living room to the dining room. The living room is 10.5 square meters, dining area covering 10.9 square meters and a kitchen of 7.8 square meters. The kitchen next to the dining area opens to the back of the house which is a service area that will serve as a dirty kitchen and laundry area. The setback on the back is 2 meters which can be used for many other purposes. Go to the left side of the house, this is where 3 bedrooms and bathrooms are located. Master bedroom 1 or bedroom has a floor area of 9,3 square meters with built-in wardrobe and en-suite bathtub. Bedroom 2 & 3 share a common bathroom with built-in cabinets for each room. This house is still considered a small house because the total floor area of only 82.0 square meters is suitable for small families. This is an affordable home because of its simplicity and a maximized floor area. 3 Bedroom Bungalow House Design
Incoming search terms:
- a simple 3 bedroom bungalow